The SS Series Controller is a highly configurable, multiplexing switch for servo command signals. The SSC can be used to control RC servo or other UAV servo devices. It allows the dynamic selection of servo command signals from several pulse signal sources. Pulse sources include asynchronous serial communication packets from a control computer, pulse signals from a conventional radio control receiver or other servo pulse generator, and user definable constant signals.

SS Series Controller is used in Microbotics' APS Series Advanced Programmable Controller assembly as a control board that forms the programming and control center of the APS series autopilot platform.

SS Series Controller Features

Small size and weight: 2.25 x 2.43 inches (57 x 62 mm), 34 grams

24 pulse signal channels with up to 16 of them definable as pulse inputs

6 auxiliary digital channels that can be assigned for general I/O, timer (e.g. RPM), or pulse signal operation

Switch between five servo command sources

Map any source to output for any command condition

Serial messages that report switch status, including the current state of the sources

All serial messages can be configured for polling or continuous output up to 50Hz

30 Day Free Support

Typical Applications for the SS Series Controller

Vehicle operation


Unmanned vehicle development

Payload control

Radio control pilot/operator training

Radio control link redundancy (safety switch operations)

Product Specifications

Input Voltage: 10-32 VDC

Input Power: 500 mW

Serial Ports: RS-232 at 115.2 Kbaud

Digital Inputs: 3.3V CMOS, TTL-Compatible, 5V Tolerant

Digital Outputs: 3.3V CMOS, TTL-Compatible

Product Documentation

Users Manual

Application Notes

For Pricing and Terms